Filter
Top Products
Manually Assigning a Static IP Address
Members using static IP on their home network may wish to configure the adaptor
with static IP. If you have obtained a static IP from your Internet service provider (ISP)
and wish to configure your adaptor with your static IP settings, please follow the
instructions below:
1. You will first have to obtain the following information:
• IP Address • Default Gateway • Subnet Mask
If you are using a router, please contact your router manufacturer for
instructions for retrieving this information from the router directly. If you are
not using a router, please obtain the above information from your ISP.
2. Pick up the phone connected to Phone 1 and dial ****. You will hear a voice
prompt saying "Sipura configuration menu: please enter option followed by
the pound key, or hangup to exit".
3. Dial 101# to access the Static IP configuration menu.
4. Dial 0# to disable DHCP, then dial 1 to save the setting.
5. Dial 111# to access the IP Address Menu. Enter the SPA-2000's IP Address
followed by # (using * to represent “.” eg. 123*45*67*89# to represent the IP
address 123.45.67.89). Press 1 to save the setting.
6. Dial 121# to access the Subnet Mask Menu. Enter the SPA-2000's Subnet
Mask followed by # (using * to represent “.” eg. 255*255*255*0# to represent
the mask 255.255.255.0). Dial 1 to save the setting.
7. Dial 131# to access the Default Gateway IP Address Menu. Enter the Internet
Gateway's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the
setting.
8. Dial 161# to access the DNS Server IP Address Menu. Enter the Primary
DNS Server's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the
setting.
9. Hang up the phone.
You have now completed the static IP configuration.
To verify the configuration was correct, pick up the phone connected to Phone 1 and
dial ****. You will hear a voice prompt saying "Sipura configuration menu: please
enter option followed by the pound key, or hangup to exit".