Filter
Top Products
V3299pr-0920
9
Steering
Column
DASH VIEW
Steering Wheel
Wire with Connector
Turn Signal
• Position the turn signal with the hollow side down.
• Fit the wire with connector on the end of the steering
wheel through the center of the turn signal.
• Fit the turn signal onto the steering wheel.
• Plug the motor harness connector from the vehicle
into the steering wheel connector.
• While carefully feeding the wire down into the dash, fit
the steering wheel onto the end of the steering column.
Motor Harness
Connector
Steering Wheel
Connector
ASSEMBLY
7
8
9
• Fit the remaining lock nut onto the end of the
steering column.
• Tighten the lock nut with the assembly tool.
Lock Nut
• “Snap” the steering wheel cap into the center of the
steering wheel.
Steering
Wheel Cap
End of Steering Column
10
11