Filter
Top Products
10
V3299pr-0920
• First, “snap” the front of the seat to the vehicle
A
.
• Next, “snap” the four tabs near the back of the seat
into the matching slots in the vehicle
B
.
B
A
• Using a slotted screwdriver, turn both lock fasteners
a ¼ turn to the locked position .
LOCKED UNLOCKED
ASSEMBLY
12
13
SIDE VIEW
Handle
Latch
Note: Be sure the end of the handle is clean and free
from debris before inserting.
• Make sure the front wheels are not turned.
• Locate the latch on the back end of the vehicle.
• Press the tab and slide the latch to open.
• Insert the handle, as shown, and release the tab.
IMPORTANT! If the latch closes, the handle is properly
inserted. If it does not, remove the handle and repeat
this step.
BACK VIEW
14