Filter
Top Products
• Fit the handlebar cover to the back of the fork and the handlebar.
• Fit two #8 x
3/4
3/4” screws through the outside holes in the
handlebar cover. Tighten the screws.
• Fit the #8 x 2 ” screw through the hole in the center of the
handlebar cover. Tighten the screw.
• Fit the seat stem into the large hole in the top of the frame.
• Slide the seat pin into the hole on one side of the frame, and
through a hole in the seat stem.
Hint: The seat is designed to be adjustable to your child’s size.
Have your child sit on the seat and check the foot to pedal
distance. Adjust the seat up or down for your child’s comfort!
Seat Stem
Seat Pin
#8 x
”
Screw
#8 x 2
” Screw
Assembly
Handlebar Cover
#8 x ” Screw
19
20
17
8
18
• Check to be sure you have assembled the fork to the frame
properly. When assembled correctly, the tab faces forward and
there are no gaps between the handlebar and the handlebar
cover. If the tab faces the rear of the assembly and there are no
gaps between the handlebar and handlebar cover, remove the
screws and review assembly steps 15 - 17.
No Gap
Tab
OK