Filter
Top Products
Pedal
• Lift and “snap” the rear wheel assembly into the grooves in the
back end of the frame.
• Pull down on the rear wheel assembly to be sure it is secure.
Grooves
• Fit a wheel bushing into the center hole in each side of the
front wheel.
Front Wheel
Wheel Bushings
• Check to be sure you have assembled the rear wheels to the
frame properly. First, turn the pedals. If one of the rear wheels
turns, you have assembled them correctly. If not, please remove
the rear wheels and follow assembly steps 3-6.
Assembly
• Place one end of the front axle into a cap nut. Tap the end of
the front axle with a hammer. Make sure the cap nut is securely
attached to the front axle.
Hint: You may want to place a scrap block of wood underneath
the cap nut to protect the assembly surface.
Front Axle
Cap Nut
Rear Wheel
Assembly
5
6
7
8
.354"
5