Filter
Top Products
Rear Axle Release Levers
• Press the rear axle release levers on the back end of the frame.
Rear Axle
Assembly
• Lower the rear axle assembly.
• Locate the four screws on each rear wheel. These screws should
face out when assembling the rear wheels to the frame.
• Make sure the gear in the center of each rear wheel is flush with
the outside surface of the rear wheel.
Hint: After assembly is complete, the Trike2Bike will be ready to
ride as a Trike.
• Fit and slide the rear wheels onto the ends of the rear axle.
Gear
Rear Axle
Rear Wheels
Assembly
Press
Press
Screws
1
2
3
4
4
4