Filter
Top Products
• Slide the front axle through the center hole in the front wheel.
• Fit the ends of the front axle into the grooves in the fork.
Fork Grooves
Front Wheel
• Fit the retainers over the ends of the front axle and onto
the fork.
• Insert two #8 x ” screws into each retainer and tighten.
Retainers
Front Axle
Front Axle
Assembly
•
Turn the fork assembly on its side with the front axle facing up.
• Place the remaining cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it in place. Pull on the
cap nut to be sure it is secure.
• Set the fork assembly aside.
Hint: You may want to place a scrap block of wood underneath the
assembly to protect the assembly surface.
Front Axle
Cap Nut
9
10
11
12
.354"
6