Filter
Top Products
9
Assembly
21
•Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
Elastic
Loop
Elastic
Loop
22
•Position the lights ‘n sounds tray on a flat surface, with the
roller facing you.
•Position the mirror base, with the scooped area toward you.
•Fit the four mirror base pegs into the four holes in the
lights ‘n sounds tray.
Mirror Base
Lights ‘n
Sounds Tray
9
23
•Turn the assembly over.Insert four
#8 x 1
3
/8" screws into the bottom of the lights ‘n sounds tray
and tighten.
Assembly is now complete.
#8 x 1
3
/8
”Screw - 4
Shown Actual Size