Filter
Top Products
Sound ‘n Lights Tray
•Fit the sound ‘n lights tray to the tray, as shown.
•Baby activates sounds and lights by pulling on the dog or
cat; or rolling the bar.
Sound ‘n
Lights Tray
Tray
Cat
Bar
Dog
Storage
Press
Buttons
•Press the button on the inside of each housing and push
the rear legs toward the front legs. Stand the frame against
a wall for storage.
Care
To remove the pad:
•Unhook the four elastic hooks from the pegs on the seat
back and bottom.
•Push the restraint belts back through the slots in the pad.
•Slide the upper pad pocket off of the seat back.
•Slide the lower pad pocket off of the seat bottom.
To replace the pad:
•Refer to Assembly steps 19 - 21.
Note: This product has no consumer serviceable parts.Do not
take this product apart.
The pad is machine washable.Wash the pad separately in cold
water on the gentle cycle. Do not use bleach.Tumble dry
separately on low heat and remove promptly.The frame,tray
and sound ‘n lights tray may be wiped clean using a mild
cleaning solution and a damp cloth. Do not immerse the
sound ‘n lights tray.
Restraint
Belts
Upper
Pad
Pocket
Lower
Pad
Pocket
Elastic
Loops
Elastic
Loops
15