Fisher-Price B2388 Baby Swing User Manual


 
Assembly
6
10
9
12
11
•Position the bracket so that the tall end is toward the
bottom edge of the seat.
•Fit the grooves on the bracket to the seat tubes, as shown.
Seat
Tubes
Bracket
Grooves
Tall
End
Lock Nut
Hexagonal
Opening
Shown Actual Size
M4 Lock Nut
Rounded Side
Insert four M4 screws into the seat tubes
and tighten.
Bracket
Seat Tubes
M4 Screw - 4
Shown Actual Size
•Rotate the seat tubes down.
Seat
Tubes
•Fit the seat wire through the slot in the bracket as shown.
Seat Wire
Bracket Slot
Bottom
Edge of
Seat
Hint: The M4 lock nuts have been assembled to the bracket at the
factory.During shipment of this product,they may have fallen out.
Check to be sure there is a lock nut in each hexagonal opening on
the bracket.If one (or more) has fallen out, fit the lock nut into a
hexagonal opening in the bracket.Make sure the rounded side of
the lock nut is facing up.