Filter
Top Products
8
Assembly
17
•Position the seat assembly so that the front of the seat is
toward the curved front base.
•While pressing the buttons on the swing tubes, insert them
into the frame hubs.Push the swing tubes up until the
buttons “snap” into the hole in the frame hubs.
•Push down on the seat to be sure the seat is secured in both
frame hubs.
Swing
Tube
Front
of Seat
Curved
Front
Base
Push
Button
Frame Hub
18
• Insert a #8 x 1
3
/8" screw into
each frame hub and tighten.
•Again, push down on the seat to be sure the seat is secured
to both frame hubs.
Frame
Hubs
#8 x 1
3
/8
”Screw - 2
Shown Actual Size
19
•Fit the pocket on the back of the pad onto the seat back.
•Fit the waist belts through the smaller slots in the pad.
Waist Belts
Pad
20
• Lift the bottom of the pad.
• Insert the pad elastic loops through the holes in the
seat bottom.
• Insert the crotch belt through the slot in the pad.
•From under the seat, fit the elastic loops onto the tabs
on the seat bottom.
Pad
Elastic
Loops
Holes
Crotch
Belt
Seat Bottom
8