Filter
Top Products
• Carefully turn the vehicle frame over.
• Fit the curved end of the steering column through the
hole in the steering linkage.
Assembly
11
13
Curved End of
Steering Column
Steering Linkage
Bottom View
• Turn the vehicle frame upright.
• Insert the steering column straight end up through the
hole in the steering wheel.
• Fit the steering wheel neck down into the hole in
the cowling.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
front axle.
Hint: You may want the help of another adult to support the
steering column while you tap the cap nut with the hammer.
14
15
Cap Nut
Cap Nut
Steering Column
Bottom View
Steering
Wheel Neck
Hole
Cowling
16
•
Fit the peg on the exhaust pipe front to the exhaust
pipe back.
• Insert a screw through the exhaust pipe back and into
the exhaust pipe front. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Peg
Exhaust Pipe Front
Exhaust Pipe Back