Filter
Top Products
Displaying the EGP Group Neighbor Table Detail Window 12-3
Viewing EGP Group Information
State
The EGP state of the local system with respect to this entry’s EGP neighbor,
according to egpNeighState. Each EGP state is represented by a value that is one
greater than the numerical value associated with the EGP peer. Possible EGP
states are:
•idle
• acquisition
•down
•up
•cease
• no neighbor
The following two fields are displayed for devices that firmware supports MIB-II:
InErrs
The number of EGP messages received from this EGP peer that proved to be in
error (e.g., bad EGP checksum), according to egpNeighInErrs.
OutErrs
The number of locally generated EGP messages not sent to this EGP peer due to
resource limitations within an EGP entity, according to egpNeighOutErrs.
Displaying the EGP Group Neighbor Table Detail
Window
The EGP Group Neighbor Table Detail window, Figure 12-2, allows you to get
more detailed EGP information for devices that support SNMP MIB II.
There are two ways to access the EGP Group Neighbor Table Detail window:
1. Double-click on an entry in the Neighbor Table of the EGP Group window.
or
1. Click to highlight an entry and click the Detail button.
The EGP Group Neighbor Table Detail window, as shown in Figure 12-2,
opens.
Figure 12-2. EGP Group Neighbor Table Detail Window