Filter
Top Products
Reinstall Harness System
1
Insert metal clip of the
buckle down through the
pad and shell.
2
From under seat, pull
metal clip down through
slot in bottom of seat.
From the front, pull buckle
tight.
3
Push harness clip down
through slot in the pad
and shell.
4
While pulling up on strap,
slide harness guide into
slot until it clicks in place.
Do the same for the
other side harness.
6
Refasten harness to
splitter plate. Make sure
harness does not twist.
5
Rethread harness into
harness slots. Make sure
harness does not twist.
WARNING
!
Failure to reattach the harness correctly,
can result in serious injury or death.
62
63
4358-3832A US Prospect 2/23/06 10:18 AM Page 65