4
Pull on harness adjustment
strap to tighten harness
snugly.
NOTE: A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
Securing Your Child in the Child
Restraint
1
Position harness straps
over the child’s shoulders.
3
Snap the harness retainer
together.
2
Push each buckle plate
into buckle until you hear
a “click”. Remember to
always pull up on harness
straps to make sure buckle
is locked tightly.
continued on next page.
WARNING
!
Failure to use the headrest when using the
internal harness system can result in
serious injury or death.
24 25
4358-3832A US Prospect 2/23/06 10:18 AM Page 27