Filter
Top Products
Page 9
MIDI Functions
The Bass Whammy features a MIDI input for receiving incoming MIDI data. MIDI messages can
select a Whammy effect and set whether the effect is in an active or bypassed state. MIDI CC
messages can then be used to control the Bass Whammy Expression Pedal position.
MIDI Channel
The Bass Whammy can receive MIDI messages on any, or all MIDI channels. The following steps
outline the procedure for accessing or changing the MIDI channel.
1. Disconnect the power from the Bass Whammy pedal.
2. Press and hold the Effect On/Off Footswitch while reconnecting the power. One of the
Effect LEDs will begin to flash indicating the currently selected MIDI channel.
3. Using the reference chart below, rotate the Selector Knob to select the desired MIDI
channel.
4. Press the Effect On/Off Footswitch again to exit the MIDI set up menu.
OCT 2OCT
OCT 10TH
OCT OCT
OCT 4TH
5TH OCT
5TH 5TH