39
Operating the Remote Control (Select models)
Operación del control remoto (modelos selectos)
Fonctionnement de la télécommande (certains modèles)
VIBRATION: Push the VIBRATION ( ) button once to activate vibration cycle
and it will automatically turn off in 10 minutes. To immediately stop the vibration
cycle, press the VIBRATION ( ) button again. Note: When the LIGHT ( )
button is pushed in the middle of the vibration cycle the light will turn off when
the vibration cycle ends.
LIGHT: Push the LIGHT ( ) button once to activate light cycle and it will
automatically turn off in 10 minutes. To immediately stop the light cycle, press
the LIGHT ( ) button again. Note: When the VIBRATON ( ) button is pushed in
the middle of the light cycle the vibration will turn off when the light cycle ends.
MUSIC/FAST FORWARD: Push the MUSIC/FAST FORWARD ( / ) button
once, it will move to the next melody/sound, play for the 10 minute cycle and
stop. If you press and hold down the MUSIC/FAST FORWARD ( / ) button for
2 seconds, it will play the current melody/sound continuously for 5 minutes and
stop.
OFF: To stop all of the functions and put the NiteLite into SLEEP mode press
the OFF button. The OFF button does not turn off the power on the NiteLite. To
prolong life of batteries, make sure to slide the power switch on the NiteLite to
the OFF position.
24B. With the switch in the MELODY
( ) or SOUND ( ) position you
can activate the following:
VOLUME: To increase the sound,
press the ( ) side of the button. To
decrease the sound, press the ( )
side of the button.
24B