Filter
Top Products
EN-46
Recording and Playback
3.
Touch “0”.
This turns on the recorder and enters recording mode.
• Each touch of “0“ cycles through modes as shown
below.
Playback mode
Recording mode
4.
Start playing something on the keyboard.
This will cause recording to the USB flash drive to start.
• You can also start recording by touching “X”.
• The 5 AUDIO a button is lit while recording is
in progress.
• Do not remove the USB flash drive from the USB
flash drive port while the 5 AUDIO a button
lamp is lit or flashing. Doing so will interrupt
recording and may corrupt data.
5.
To stop recording, touch “Y”.
• You can also enter the recording mode by pressing
the 3 REC MODE button and then touching
“AUDIO RECORDER”.
1.
On the MENU screen, touch “AUDIO
RECORDER”.
2.
Touch “0” to enter the recording mode.
3.
Touch “X”.
4.
Press the 4 MIDI a button.
• This starts playback of the Digital Piano’s memory
contents. Play along on the keyboard.
5.
To stop recording, touch “Y”.
Unlit
Lit Flashing
To record keyboard play with playback
from Digital Piano memory
Lit Flashing
PX360-ES-1A.indd 48 2015/04/24 12:46:49