Filter
Top Products
two pieces of the buckle together
- they connect like parts in a puz-
zle - and insert them together into
the buckle. You should hear a
click to indicate that the buckle is
securely fastened.
8 Gently pull up on the harness
straps to tighten the lap section of
the harness, which should fit low
down on your child's body.
9 Slowly pull the Adjuster Strap
located on the front of the seat,
between the child's legs. This will
tighten the harness around the
child, making sure that the har-
ness is a comfortable but SNUG fit
around the child. A snug fit allows
you to place two fingers between
your child's body and the harness.
Make sure that the Chest Clip is
open before firmly adjusting the
straps.
10 Finally, fasten the Chest Clip.
Connect the two halves of the
chest clip together. Double Check:
The correct height for the chest
clip is at the middle of the chest,
level to the child's armpit.
Securing Your Child
Securing Your Child
22 23
Once all adjustments have been
made to properly fit your child in
the child seat and the child seat
has been secured properly in the
vehicle, follow these instructions
to restrain your child in the
Expressway.
1 Loosen the harness by pushing
the adjuster lever located in front
of the seat.
2 While pressing the lever, pull
the shoulder straps forward. (See
Figure A)
3 Unfasten the Chest Clip by
squeezing the middle tab(s)
together.
4 Unfasten the buckle by press-
ing down on the middle red but-
ton.
5 Move the harness straps to the
side of the seat. Use the hook and
loop fastener located on the
straps and side of the cover to aid
in holding the straps.
6 Place child in the seat.
7 Position the harness straps
around the child and bring the
A
B
C
D
E
F