Filter
Top Products
Using ESP Manager
28 Chapter 4 Manual Documentation Number ESR90x-0508m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
• Protocol - Displays the currently selected TCP or UDP mode for the
Serial Server.
•
Port - Displays the port number for each Serial Server port.
•
Flow Control - Indicates what type of flow control is configured for
each port.
•
Status - Indicates whether each port is currently In Use or Not Used.
Status Bar
Displays the current status of the software in the bottom, left corner of the screen
• Ready
• Updating
• Searching reachable servers…
Search for Servers
Upon opening the ESP Manager software it will automatically
execute Searching Server and search for all reachable ESR90x serial
servers.
Step 4: To manually initiate a search for servers, click Searching Servers
(under the Servers menu or the icon on the left side of the screen).
The Search Setup box will appear.
It provides two options for searching for servers on the network:
Specify the IP Address of the Serial Server
Search all reachable servers
Step 5: Enter the IP Address assigned to the desired Serial Server or click
Search all reachable servers, then OK. IP Address is used to find
Serial Server units that are not on the same subnet. (Routers on the
network will block the standard broadcast used to find servers if
Search all reachable servers is selected.) The user must set an IP
address that conforms to the LAN addressing scheme.
The Searching window is shown until all active Serial Servers on
the LAN are listed in the
Serial Server List window.