Filter
Top Products
Caution: Do not attempt to use memory cards other than microSD cards
with this phone. Attempting to use non-compatible memory cards might
cause loss of data or damage to the phone, and may void your Warranty.
Removing the microSD Card
Hold the Power Key to power off the phone.
Remove the back cover.
Carefully slide the microSD card out of the slot.
Charging the Battery
Note: For best performance, charge the battery fully prior to using the
phone for the first time.
Insert the charger’s connector into the charging port. Be sure to insert
the connector in the correct orientation. Do not force the connector
into the port.
Plug the charger into a standard AC wall outlet.
4 Getting Started
When the battery is fully charged, unplug the charger and disconnect it
from the phone.
Notes:
• The phone automatically powers off whenever the battery power is
too low.
• Use only the charger supplied with the phone, or other chargers
approved by ZTE. Using an unapproved charger may cause damage to
the phone and may void your Warranty.
• If the battery is completely discharged or has not been used for an
extended period of time, the screen may not display the charge
indicator until the battery has been continuously charged for 10 to
40 minutes.
• Do not attempt to charge the battery at temperatures lower than
32°F (0°C) or higher than 113°F (45°C).
Switching Your Phone On/Off
Note: Take care to observe all posted signs and rules restricting or
prohibiting the use of handheld mobile devices.
Hold the Power Key to turn your phone on or off.
5Getting Started