AT&T Z432 Crib Toy User Manual


 
Removing the SIM Card
Hold the Power Key to power off the phone.
Remove the back cover and battery.
Gently remove the SIM card from the card slot.
Inserting the microSD™ Card
Note: This phone can support a memory card with a capacity of up to 32 GB.
Hold the Power Key to power off the phone.
Remove the back cover.
Insert the microSD card carefully with the metal contacts facing
downward. Make sure that the card is fully seated in the slot.
Replace the back cover.
3Getting Started
Inserting the SIM Card
Note: You can obtain a SIM card from your service provider when you sign
on as a subscriber.
Caution:
• Do not bend, scratch, or touch the metal contacts of your SIM card.
• Keep the card away from electrical appliances and magnets.
• Disconnect the charger and other accessories from your phone and
remove the battery before inserting or removing the SIM card. Failing to
do so could cause information on the card to be lost or destroyed.
Hold the Power Key to power off the phone.
Remove the back cover and battery.
Insert the SIM card into the card slot with the cut corner facing outward.
Insert the card into the card holder and push it until it clicks into
position. Make sure that the SIM card is fully seated in the slot.
Reinsert the battery and replace the back cover.
2 Getting Started