7.0 SETTING OF FUNCTIONS
7.1 ENTER FUNCTION SETTING MODE
• Press [On/Off] to turn the power off.
• Press [Tare] first, then press [On/Off], while keeping [Tare]
pressed. The display will show "A-On" or "A-OFF".
7.2 SELECTION OF AUTO SHUT OFF MODE
• When the display shows "A-On" or "A-OFF" press [Unit] to select auto
shut off setting mode.
• Press [Tare] to choose "On" or "OFF" mode,
"A-On" means auto shut off function is active.
"A-OFF" means this function is inactive.
• Turn off the power and then turn it on again to enter the normal
weighing mode. The delay time will be about 2 minutes.
7.2 SELECTION OF AUTO BACKLIGHT MODE
• Next press [Unit] to enter the backlight setting mode. The display
will show "L-On" or "L-OFF".
• Press [Tare] to choose "On" or "OFF" mode,
"L-On" means auto backlight function is active.
"L-OFF" means this function is inactive, i.e. backlight is shut off.
• Turn off the power and then turn it on again to enter the normal
weighing mode.
© Adam Equipment Company 2006
8