Filter
Top Products
6.0 WEIGHING
6.1 BEFORE WEIGHING
Be aware of the Automatic power-off function. If the Automatic power-off
function is active it will turn the balance off after 2 minutes of inactivity.
6.2 WEIGHING PROCEDURES
• Press [On/Off] to turn on the balance.
When power is turned on, all display segments appear on LCD for a
few seconds and finally on the display
"0.00" will appear along with
the last selected units.
• Select the weighing unit with [Unit].
Press [Unit] to select a weighing unit, eg. "g" / "ct" / "oz" or "dwt" .
Once the unit has been selected, the weight will be displayed in the
selected unit and a symbol for the weight will be shown.
• Start weighing
• If you do not use a container for weighing
Verify the reading is "0.00". If not, press [Tare] to display "0.00".
Place the objects on the weighing pan to weigh.
When the reading becomes stable, the stable indicator is displayed.
• If you use a container for weighing
Place an empty container on the pan.
Wait for the stability indicator to be displayed and press [Tare].
Place the objects to be weighed in the container.
When the reading becomes stable, the stable indicator is displayed.
Only the net weight is displayed.
© Adam Equipment Company 2006
7