Adam Equipment GFK 150M Building Set User Manual


 
46
| P a g e © Adam Equipment Company 2010
13.3. Scale Parameters
Shortcut to enter this group is to press and hold the [Count] Key for 4
seconds. The display will go directly to “S1 Un ”.
Press [Func] to view the list of parameters.
Press [Tare] to enter a parameter. Press [Func] to view the options for the
parameter settings.
Press [Tare] to confirm the change and then advance to the next parameter
by pressing the [Func] key.
Press [Zero] to return to the group “FUnC 3”. If you press [Zero] again, the
scale will exit the User Parameter section and return to normal weighing.
This group of parameters are used to control the operation of the scale.
Parameter Description
Options Default
setting
S1 Un
Enable or disable weighing
units, Not all units are
available for all scales
settings.
Only USA scales have
imperial unit.
kg
g
lb
oz
lb:oz
kg
S2 bL
Backlight set to always on,
always off or automatic on
whenever a weight is
placed or a key is pressed
EL oFF
EL on
EL AU
EL AU