A SERVICE OF

logo

8-29
NOTE:
_
There are alignment marks on each side of
the swingarm and on the hub. Use them to
check for proper wheel axle alignment.
_
1. Locknut 2. Adjusting bolt
3. Alignment marks
3. After adjusting, tighten the locknuts and
the wheel hub nuts to the specified
torques.
Tightening torques:
Locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
Upper wheel hub nut:
120 Nm (12.0 m·kgf, 86 ft·lbf)
Lower wheel hub nut:
60 Nm (6.0 m·kgf, 43 ft·lbf)
U5NF12.book Page 29 Wednesday, May 8, 2002 11:11 AM