A SERVICE OF

logo

8-32
2. Turn in the adjusting nut on the brake ca-
ble to provide a gap of 01 mm (0
0.04 in) between the lever and the pin.
1. Adjusting nut (brake cable) 2. Lever
3. Pin a. Gap
3. Turn the adjusting bolt until the free play
at the brake lever pivot is 5.07.0 mm
(0.200.28 in).
1. Locknut 2. Adjusting bolt
a. Rear brake lever free play
4. Tighten the locknut.
5. Install the footboard.
EE.book Page 32 Friday, May 27, 2005 2:09 PM