Vulcan Technology VCCB36 Manual

A SERVICE OF

next previous

-

9 -

LIGHTING THE GAS PILOT

1.Turnmaingasshut‐offvalveand

theindividualburnergasvalvesOFF.

Wait5minutes.



2.Removethetopgratesandradiants.

Turnthemaingasshut‐offvalveON.

Lightpilotsusingalittaper.SeeFig.6.

Adjustthepilotvalvescrewuntil



thepilotflamehasaslightyellowtip.



3.Tolighttheburners,turnthe

individualburnervalvesON.



4.Iftheburnersfailtolight,turnall

valvesandthemaingasshut‐off

totheOFFpositionandcontactan

authorizedserviceagency.



PILOT ADJUSTMENT

TO COMPLETELY SHUTDOWN THE BURNERS AND PILOT LIGHTS

For complete shutdown: Turn the main gas shut-off valve OFF. (Make sure all individual

burner valves are off before relighting.)

PREHEATING THE CHARBROILER

Allow the charbroiler to preheat for 30 minutes. Rub grates with cooking oil before using.

Fig. 7

FIG. 6

Pilot

Using a flathead screwdriver, turn the

slotted hex-head pilot adjustment

screw clockwise to decrease the

flame, and counter clockwise to

increase the flame. See Fig. 7.

Pilot Adjustment Screws