60
To connect Scanner to External Modem:
Plug the scanner end of the RS232C straight interface cable into the remote port on the rear
of your scanner. Plug the other end of the cable (DB-9 serial connector) into the external
modem. You may need a DB-9 to DB-25 (or DB-9) null modem adapter, available at most
computer stores. Of course, make sure your external modem is turned on. Make sure that
you have a phone line plugged into the modem jack on the back.
To perform the SmartScan Download:
You can automatically download frequencies, talkgroups and fleet maps form the Uniden
National Database server. After connecting to either an internal or external modem, using
the the steps above, turn the radio on.
1. Press
MENU
.
2. Select SYSTEM DATA - SMART SCAN - DOWNLOAD using ▲, ▼ or VFO and pressing
E
,
SELECT
or VFO.
3. Using the keypad, enter the ZIP code for the area you
will be using your scanner.
For example, if your ZIP code is 02135.
4. Press
E
or
SELECT
, the ZIP code is stored into memory.
The dial-in telephone number appears on the display.
Note: If you want to change the number, input a number
(max. 20 digit) using the keypad then press
E
.
5. Press
SELECT.
The memory clear message appears
on the display.
Press
1
to start clearing.
Note: If you want to prevent some banks from being
overwritten by the frequency download or memory
clear operation, go to Bank Lock. (see page 62.)
BC780XLT1.qxd 10/08/2000 5:03 PM Page 60
