32
Note: • CTCSS: Continuous Tone Coded Squelch System.
• DCS: Digital Coded Squelch.
• For example, the scanner shows the following displays.
• If the delay feature (-2 sec/-5 sec/-10 sec) has been set while in Tone search mode,
it resumes scanning according to the delay setting.
Additional Menu Options for Searching
Each of these additional menu options apply to all banks with search ranges entered. If there
is a bank that you do not want an option to apply, then simply press the bank number on the
numerical keypad. You will see the bank number that you have selected, disappears from
the display. (For more information on these options refer to the “Menu Descriptions” section
and “Additional Features” section.
Options:
RECORD (for more information see page 11)
1. Press
MENU
.
2. Press ▲ or ▼ to select SEARCH EVENT and then press
E
.
3. Press ▲ or ▼ to select RECORD and then press
E
.
4. Set to ON using ▲, ▼ or VFO and pressing
E
.
LINE
is lit on the display.
ATTENUATOR (for more information see page 24)
1. Press
MENU
.
2. Press ▲ or ▼ to select SEARCH EVENT and then press
E
.
3. Press ▲ or ▼ to select ATTENUATOR and then press
E
.
4. Set to ON using ▲, ▼ or VFO and pressing
E
.
ATT
is lit on the display.
DELAY
Refer to page 24.
Tone SQ on,
CTCSS 123.0 Hz set
Tone Search,
CTCSS 67.0 Hz detected
Tone Search,
DCS 023 detected
Tone Search,
no signal present
Tone SQ on,
DCS 325 set
Tone SQ on,
No CTCSS & DCS set
BC780XLT1.qxd 10/08/2000 5:02 PM Page 32
