TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you
can select either Automatic, TKIP or AES as Encryption.
PSK Password - Enter a password for your wireless network here, which should be
ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64.
• No Change - If you choose this option, wireless security configuration will not change.
These settings are only for basic wireless parameters, for advanced settings, please refer to
Section 4.5: "Wireless."
4. Click the Next button. You will then see the Finish page.
Because there are something changed on the Wireless page, you will see the Finish page as
shown in Figure 3-14. Click the Reboot button to make your wireless configuration to take
effect and finish the Quick Setup.
Figure 3-14 Quick Setup – Finish
If you don’t make any changes on the Wireless page, you will see the Finish page as shown
in Figure 3-15. Click the Finish button to finish the Quick Setup.
Figure 3-15 Quick Setup - Finish
16
