A SERVICE OF

logo

Replacement Procedures
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual 4-21
4.7 Keyboard
Removing the keyboard
The following procedures describe the way of removing the keyboard.
CAUTION: As the keycap may fall out, when handling the keyboard, you shall always
hold it by the frame and do not touch the keycap.
1. Turn the computer upside down and remove the battery
2. Loose the screw securing KB Holder.
M2.0x2-I Flat BIND screws x2
3. the computer again.
4. Open the LCD cover
5. Remove KB holder and remove below screws.
2.0 x 3.0B BIND screw x2
6. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to
remove it.
7. Disconnect keyboard cable.