A SERVICE OF

logo

I
OTHER PRINTER CONTROL COMMANDS
Set MSB to I
Mode ASCII
Decimal Hexadecimal
Both
<ES& “>”
27 62
1B 3E
Sets the most significant bit of each subsequent byte received to 1,
allowing users with a 7-bit interface to access characters with ASCII
codes greater than 127.
Set MSB to 0
Mode ASCII
Decimal
Hexadecimal
Std. <ESC> “=” 27
61 16 3D
IBM <FS> ‘,=V 26
61 1C 3D
Sets the most significant bit of each subsequent byte received to 0.
Accept MSB as is
Mode 1 ASCII
Decimal
Hexadecimal
Both 1 <ESC> ‘W’ 27
35 1B 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode
ASCII
Decimal
Hexadecimal
Std.
<DEL>
127 7F
Deletes the last character received. Ignored if the last character
received, has already been printed, or if the last character received
was all or part of a command.
Cancel last line
Mode
ASCII
Decimal
Hexadecimal
Both
<CAN>
24
10
Deletes the last line currently present in the print buffer.