A SERVICE OF

logo

Cancel superscript or subscript
Mode ASCII
Decimal Hexadecimal
Both
<ESC> ‘T” 27 84
1B 54
Stops printing superscripts or subscripts and returns to normal
printing.
CHARACTER SET COMMANDS
Select standard character set
Selects the standard character set. This is the power-up default in
Standard mode if DIP switch l-7 is ON.
Select IBM character set
Selects an IBM character set. This is the power-up default in IBM
mode.
Select character set #l
Mode ASCII
Decimal Hexadecimal
Both <ESC> “7” 27 55 1B 37
Selects character set #l.
43