GR60 User Manual ◄ 5
Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the
stickers and tags attached to the tool and hose.
These safety precautions are given for your safety. Review them carefully before operating the tool and before performing
general maintenance or repairs.
Supervising personnel should develop additional precautions relating to the specic work area and local safety regulations.
If so, place the added precautions in the space provided in this manual.
The GR60 Hydraulic Grinder will provide safe and dependable service if operated in accordance with the instructions given
in this manual. Read and understand this manual and any stickers and tags attached to the tool and hoses before operation.
Failure to do so could result in personal injury or equipment damage.
• Operator must start in a work area without bystanders. The operator must be familiar with all prohibited work areas such
as excessive slopes and dangerous terrain conditions.
• Establish a training program for all operators to ensure safe operation.
• Warning: Use of this tool on certain materials during demolition could generate dust potentially containing a variety of
hazardous substances such as asbestos, silica or lead. Inhalation of dust containing these or other hazardous substances
could result in serious injury, cancer or death. Protect yourself and those around you. Research and understand the materi-
als you are cutting. Follow correct safety procedures and comply with all applicable national, state or provisional health and
safety regulations relating to them, including, if appropriate arranging for the safe disposal of the materials by a qualied
person.
• Do not operate the tool unless thoroughly trained or under the supervision of an instructor.
• Always wear safety equipment such as goggles, ear and head protection at all times when operating the tool.
• Do not inspect or clean the tool while the hydraulic power source is connected. Accidental engagement of the tool can
cause serious injury.
• Always connect hoses to the tool hose couplers before energizing the hydraulic power source. Be sure all hose
connections are tight.
• Do not operate the tool at oil temperatures above 140°F/60°C. Operation at higher temperatures can cause higher than
normal temperatures at the tool which can result in operator discomfort.
SAFETY PRECAUTIONS
