Stanley Furniture GR60 Manual

A SERVICE OF

next previous

12 ► GR60 User Manual

4. Disengage the safety thumb latch (42) and squeeze

the trigger momentarily. If the grinder does not operate,

the hoses might be reversed. Verify correct connection

of the hoses before continuing.

5. Start the grinder and move the grinding wheel or

cone to the work surface.

6. Grind a small amount of material at a time.

7. As the grinding stone wears, adjust guard height by

depressing the guard latch (26) and rotate the guard to

lower or raise height.

COLD WEATHER OPERATION

If the grinder is to be used during cold weather, preheat

the hydraulic uid at low engine speed. When using the

normally recommended uids, uid temperature should

be at or above 50° F/10° C (400 ssu/82 centistokes) be-

fore use.

OPERATION