59
Customizing your camcorder
See page 54.
See page 55.
See page 56.
See page 56.
You can set this function when you use the
built-in flash (DCR-SR200/SR300), or an
external flash (optional) that is compatible
with your camcorder.
HIGH( )
Makes the flash level higher.
BNORMAL( )
LOW( )
Makes the flash level lower.
You can set this function when you use the
built-in flash (DCR-SR200/SR300), or an
external flash (optional) that is compatible
with your camcorder.
You can prevent redeye by activating the
flash before recording.
DCR-SR62/SR82:
Set [REDEYE REDUC] to [ON], when
using this function.
DCR-SR200/SR300:
Set [REDEYE REDUC] to [ON], then press
(flash) (p. 26) repeatedly to select a
setting.
(Auto redeye reduction): Pre-flashes to
reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r
(Forced redeye reduction): Always
uses the flash and the redeye reducing pre-
flash.
r
(No flash): Records without flash.
b Notes
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
See page 27.
NIGHTSHOT LIGHT
STEADYSHOT
(DCR-SR300)
GUIDEFRAME
(DCR-SR200/SR300)
ZEBRA
(DCR-SR200/SR300)
FLASH LEVEL (except
for DCR-SR42)
REDEYE REDUC (except
for DCR-SR42)
STILL MEDIA
