English - 29
System Setup
Manual Channel Set can be used after you have
performed Auto Channel Memory.
Use the Manual Channel Setting to delete unnecessary
channels after finishing the Auto Channel Memory
process.
4
Select Channel Add/Delete using the
…†
buttons, then press the ENTER or √ button.
5
Select the channels you want to add or delete on
the “Select channel” screen using the
…†
or
number buttons. Then, press the ENTER button.
•
Using CH ( ) buttons for channel selection
allows the user to add/delete one channel at a time.
•
Using
…†
buttons for channel selection jumps to
the next channel memorized in Auto Channel
Memory.
6
Select Add or Delete using the œ√buttons,then
press the ENTER button.
•
The message 'Channel is added.' or 'Channel is
deleted.' will be displayed in the center of the
screen.
•
Continue to add or delete as many channels as you
want to memorize or delete. This can be used to
add channels not stored automatically due to weak
signal strength.
•
Press the RETURN button to return to the previous
menu. Press the MENU button to exit the menu.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Select Setup using the
…†
buttons, then press
the ENTER or √ button.
3
Select Channel Set using the
…†
buttons, then
press the ENTER or √ button.
4
Select Antenna/Cable TV(Signal Source) using the
…† buttons, then press the ENTER or √ button.
5
Select Antenna or Cable TV(depending on the
hookup you’ve selected) using the
…†
buttons,
then press the ENTER or √ button.
6
Select Auto Channel Memory using the
…†
buttons, then press the ENTER or √ button.
Auto Channel Memory will be displayed.
The memorizing process may take a few minutes.
Channel Set
DVD-Recorder
No Disc
Timer Rec.
Setup
Antenna/Cable TV
Auto Channel Memory
√√
Channel Add/Delete
√√
Antenna
Cable TV
Auto Channel Memory
Total channel numbers : 04/125
Saved channel : 07
5%
Stop
■
If you want to stop Auto Channel Memory,
press the ENTER button.
The confirmation message will be displayed.
Select YES using the œ √ buttons, then press
the ENTER button
NOTE
Manual Channel Set
To setup, follow steps 1 to 3 in page 29.
Channel Set
DVD-Recorder
No Disc
Timer Rec.
Setup
Antenna/Cable TV : Antenna
√√
Auto Channel Memory
√√
Channel Add/Delete
√√
Channel Set
Auto Channel Memory
RETURNENTERMOVE
EXIT
Channel Add/Delete
DVD-Recorder
No Disc
Timer Rec.
Setup
Select channel : 9
Add Delete
…
…
RETURNENTERMOVE
EXIT
RETURNENTERMOVE
EXIT
