A SERVICE OF

logo

E-14
COMPLETING THE INSTALLATION
Make sure to check for gas leaks before completing the installation process
(connecting the assembly pipe and hose between indoor unit and outdoor
unit, insulating the cables, hose and pipe, and fixing the indoor unit to the
installation plate)
To check for gas leaks on the... Using a leak detector, check the...
Indoor unit Flare nuts at the end of sections
C and D.
Outdoor unit Valves on sections A and B.
Performing the Gas Leak Tests
C
D
A
B
ÃÀÖÞÏò_Inv_IM_E.indd 14 2007-3-8 15:44:47