INSTALLING THE AIR CONDTIONER
Rubber cap
Drain pan outlet
Drain hose
Screws
hole
Screw
Changing Direction of the Drain Hose
You can select the direction of the drain hose, depending on where you want to
install the indoor unit.
1
Detach the rubber cap with the flyer.
2
Detach the drain hose by pulling it and turning to the left.
3
Insert the drain hose by fixing it into the groove of the drain hose and the
outlet of the drain pan.
4
Attach the rubber cap with a screwdriver by turning it to the right until it fixes
to the end of the groove.
One of the diagrams has an illustration with the words “Screws hole” that
should be changed to “Screw hole.”
Drain hole
Installing and Connecting the Drain Hose of the Outdoor Unit
While heating, ice may accumulate. During the process of defrosting, check if
condensation draining is adequate. For adequate draining, do the following:
1
Insert the drain plug into the drain hole on the underside of the outdoor unit.
There are “A” drain holes on the underside. You can use any hole for
your convenience.
2
Connect a drain hose to the drain plug.
3
Ensure that condensation draining is adequate.
Model “A”
AQV09J
AQV12J
3
AQV18J
AQV24J
1
ÃÀÖÞÏò_Inv_IM_E.indd 11 2007-3-8 15:44:42
