General Installation
96 Installation Manual
2.4.8 Caller ID Card Installation
A maximum of two Caller ID Cards (KX-TD193) can be installed to the KX-TD816, and a
maximum of three Caller ID Cards can be installed to the KX-TD1232. The Caller ID Cards
can be installed to the initially provided Outside Line Card and / or to an optional 4-CO Line
Unit (KX-TD180), as required.
The Outside Line Card of KX-TD816 can accept one Caller ID Card, and the Outside Line
Card of KX-TD1232 can accept two Caller ID Cards. 4-CO Line Unit can accept one Caller
ID Card.
Installing to the Initial Outside Line Card for KX-TD816
1. Loosen the four screws to open the inside cover of the main unit.
Note
If any cards, units, or cords are installed to the main unit, remove them beforehand.
2. Insert the Caller ID Card to the connectors on the Outside Line Card.
One card can be installed to the initial Outside Line Card.
3. Put the inside cover back on the main unit and secure the screws.
KX-TD193
CALLER ID
Outside Line Card
Caller ID Card
Inside cover
