A SERVICE OF

logo

General Installation
108 Installation Manual
3. Insert the wires coming from the door openers into holes and tighten the screws.
Pass all the wires through the Holder.
Note
The KX-TD1232 is illustrated as the main unit.
Set the door opener paired with the doorphone.
For wiring, UL 1015, AWG 22 twisted wire or the equivalent is recommended.
The wire should be between 1.2 and 2.4 mm (3/64 and 3/32 inch) in diameter including the
coating.
To door opener 3
To door opener 4
Holder
To door opener 2
To door opener 1
D=1.2-2.4 mm (3/64-3/32 inch)