Section 700 - Operation Chapter 3. System Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page 3-15
Considerations
• Caller ID service must be ordered from the local telephone operating
company or the interexchange carrier.
Caller ID Auto DISA
(CPC-A II Version 6.1 or higher and CPC-B Version 6.1 or higher)
Description
A DBS equipped for Caller ID (CID) can provide automatic DISA dial tone
based on Caller ID information. This allows up to 10 predetermined users to
access the DISA feature without requiring a trunk be left in the DISA mode.
When a CID call is sent to the DBS, the CID number is checked against the
table. If the number is found, the caller will automatically be connected to
DISA dial tone.
Related Programming
• FF1 (System Programming): Automatic DISA
Hardware Requirements
• Loop-start trunk card (VB-43511A)
• Caller ID circuit card (VB-43511)
• MFR card (Caller ID Auto DISA)
Considerations
• Caller ID feature must be enabled.
