Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-23
Operation
1. Pick up the handset.
The phone issues intercom dial tone.
2. Dial “79.”
3. Enter the number of the ringing extension.
• The extension number or the outside line number of the caller appears
on the display.
• The
EXT
LED lights on the MCO or ML key.
4. Complete the call and replace the handset.
The
EXT
LED goes off.
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B Version 3.1 or higher)
Considerations
• If more than one caller is attempting to reach the ringing extension, the
Direct Call Pickup feature answers the call that arrives first.
Once the call has been picked up, other extensions that attempt to pick up
the call receive busy tone.
• You can answer incoming calls, intercom calls (both tone and voice), call
waiting, paging, transferred calls, or recalls using the Direct Call Pickup
feature. You cannot answer alarm incoming calls or callbacks with this
feature.
