42 OES 2: NetWare Traditional File System Administration Guide
novdocx (en) 6 April 2007
6.2 Managing Traditional Software RAID0
Devices
You must use Novell Storage Services
TM
Management Utility or the NSS Storage Management plug-
in for iManager to create a software RAID0 device. For instructions, see “Managing Software RAID
Devices” in the OES 2: NSS File System Administration Guide.
After you create the RAID0, use Novell Remote Manager for NetWare to create a Traditional
volume on the device. Make sure to use the RAID0 for your segment. For information on creating a
Traditional volume, see Section 3.7, “Creating and Mounting a Traditional Volume,” on page 20.
To create a RAID 10 Traditional volume, mirror the volume you just created. For information on
mirroring Traditional volumes, see Chapter 5, “Using Software RAID1 Devices for Data Fault
Tolerance,” on page 35.
