Displaying Images on a TV Set
The video output cord provided can be used to
display images on a TV set; however, images
cannot be displayed on a TV set and the LCD
monitor at the same time.
Preparations
Make sure that the CF card containing the images
is inserted into the camera and that a bat-
tery/batteries is/are loaded or the AC adapter is
connected.
1. Connect the supplied video
output cord to the video
output terminal of the
camera and the video input
terminal of the TV set.
Next, turn on the TV set power and switch the
input to video.
2. Set the mode select dial to playback (
) and
then press the power button.
The last image recorded will appear on the
screen of the TV set. Use the select button to
change images.
* The message “No Picture in camera” is dis-
played if a CF card is not inserted or no im-
age has been recorded.
3. Press the power button of the camera to turn off
the camera power to interrupt TV playback.
To video
output
terminal
To video
input
terminal
