Key Operator Mode 13-47
Key Operator Mode
Call Remote Center [15]
When activated, the Remote Diagnostics option is automatically monitored by a Konica
service representative. In case of machine trouble, select the Call Remote Center option.
Your service representative will contact you to determine the appropriate means for
resolving the problem.
❒ Setting options: Call for JAM concerns; Call for SC concerns; Toner bottle supply call; Paper
supply call; Call for image quality; Call for others
Key Operator Mode Screen 2 Call Remote Service Center Screen
Start Call Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch [15] Call remote center to display the Call Remote Service Center Screen.
4 Touch [1] Call for JAM concerns; [2] Call for SC concerns; [3] Toner bottle supply call;
[4] Paper supply call; [5] Call for image quality; or [6] Call for others.
The Start Call Screen will be displayed.
5 Touch Start to call.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
