Inter-Tel 3000
Administrator’s Manual
44
Auto-Attendant Programming
Auto-Attendant can be enabled on a line-by-line basis from the programming extension.
If a call is received on an Auto-Attendant line when the voice mail system is busy, the call will ring as a
normal call. If the voice mail system becomes free before the call is answered, the Auto-Attendant feature
is activated, the call is automatically answered and the Auto-Attendant message is returned.
Programming Lines to be answered by the Auto-Attendant
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Select “Incoming Ringing”.
• Select the line that is to be programmed.
• Select “Day”, “Night”, or “Day and Night”.
• Select Auto-Attendant.
Press the speakerphone key to finish programming.
