A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 55
To remove the mgmt card:
1. Loosen the screw on the mgmt card.
2. Remove the mgmt card from the mgmt card connector.
Figure 37 Removing the Mgmt Card
To reinstall the mgmt card:
1. Remove the mgmt port knock-out.
Figure 38 Removing the Mgmt Port Knock-out
NOTE: You must use the slotted driver to remove the knock-out.
2. Insert the mgmt card into the mgmt card connector on the system board.
3. Tighten the screw clockwise to secure the mgmt card to the system board.