A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 37
Figure 10
Picking up the Processor from the Socket with the Installation Tool
5. Remove the processor with the installation tool.
Figure 11 Removing the Processor
NOTE: If the processor installation tool is not included, grasp the processor by its edges and lift it
out of the socket.
CAUTION: The pins of the socket are very fragile. Do not bend or damage them.
CAUTION: Place the processor on a static-dissipating work surface or in an anti-static bag.
CAUTION: To allow heat sink to draw as much heat as possible from the processor base, there must
be good contact between the heat sink base and the top of the processor. To ensure good contact,
you must apply thermal interface material.